Dow-Key Microwave MS-1U18S-4 Betreibershandbuch PDF herunterladen (Seite 25)

Configuring the Matrix

4.5 Testing Ethernet Communication

The matrix’s ability to communicate should be tested once it has been

configured and connected to an Ethernet network.

Connection thru a network:

Assuming the matrix’s default IP address setting has not been changed from

obtaining the IP address dynamically, take note of its IP address during the

boot-up process (or se section 5.2.4 to read its IP address). Assuming the

connection has been made with a personal computer connected to the same

network and running some version of Microsoft Windows©, select

Start>Run

and type

Ping nnn.nnn.nnn.nnn

where nnn.nnn.nnn.nnn is the matrix IP address previously noted.

Connection to a standalone PC:

If the matrix is connected directly to a standalone PC (rather than a network),

set the IP address of the matrix so that the first 3 numbers match the PC’s IP

address. The last number must be different.

Example: PC IP address: 200.169.200.180

Matrix IP address: 200.169.200.181

Assuming the connection has been made with a personal computer running

Start>Run

and type

Ping nnn.nnn.nnn.nnn

where nnn.nnn.nnn.nnn is the matrix IP address. In this example

200.169.200.181

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 64 65

Keine Kommentare

Dow-Key Microwave MS-1U18S-4 Betreibershandbuch Seite 25